Tips & Tricks to Fix Laptop / Notebook Damaged

Tips & Tricks to Fix Laptop / Notebook Damaged

 

 Most laptop users panic when the laptop is not working properly, so hurry take it to service center, but the software can be corrupted to be one cause nya.Ada good we first analyze the problem starting from the most minor problems.


If the laptop can still enter the bios setup loading. problem may be just the software alone is often damage to the notebook / laptop because hardwareprotect error (system protection) which was designed by the hardware manufacture to protect against damage hardwre (example: Intel chipset on the temprature above 60 'C will decide the flow / shut itself down to avoid over heating). Before concluding hardware damage to the notebook / laptop would be nice to do standard damage analysis. Some of the symptoms that arise when the notebook protects itself from over heating:

1 .Led power flame screen does not appear

1. Refrigerate for a moment the notebook, Unplug battrery, turn on using the ac adapter
2. Open the cover (bottom of the laptop) memory slots. remove the memory and then move it to another slot (if there are two memory slots) ... for some kind of laptop that only has one memory slot, remove the memory and reinstall it.
3. Open the cover of the hard disk, remove the hard disk and try to turn it on again.
4. Most notebook processors .. dapatdi see just by opening the bottom cover portion, may also try to step 5 on the processor
5. Plug it in again and try to turn it on again.

If the five phases mentioned above have been done but the notebook still not back to normal, then we can conclude there is a hardware problem with your notebook.
Damage to the lightest of the symptom is that there is damage to the memory / sodim.anda simply replace with a new memory.
There are several possible damage that occurs due to the symptoms mentioned above:

1. Processor or power supporters( APPN)
2. VGA chip ( APPN)
3. Motherboard chip ( APPN)
4. Bios chip( ic epromer)

2.  There are no leads (indicator lamp) is not lit at all.
This arises due to the absence of voltage (electrical current) that enter or voltage interruption caused by damage to the component power .
Before concluding damage to the power component you should analyze the light that you can do yourself.

• Replace Adapter / Cable with similar power to ensure that the damage occurred on the adapter / cable or on your laptop.
• Remove the Battery. To ensure no interruption caused by damage to the battery of your laptop.
• Note the lead (indacator lamp) on the adapter is lit or blinking normally (drop). If this happens, it can be ascertained the problem occurs on your laptop power ic component. should immediately contact the nearest service center.

Hopefully this article helpful ...:)